Hi,i am new to here,but i will teach you all how to make a Guild Logo into maplestory.
I have tried in a private server b4,and it can work.
But the real server i not to sure,even if it can work,people cant see it because they did'nt have the edited .wz file.
Thing you need:
HaRepackerv.30
Paint
First,u go to the HaRepackerv.30,then you select UI.wz
after that,double click GuildMark.img & double Mark.
In there u should saw
Animal
Etc
Letter
Pattern
Plant
Depending on wad u draw,u should put it in the exect property,to make it easier to locate.
After that,leave the HaRepacker hanging and go to Paint.(ya,the Accessories-Paint)
Now,let's change from Hacking mode to Painting mode.
Drag the white-paintable thing bigger first.
Then press Ctrl + PageDown
if you cant press then
go to View-Zoom-Large Size
And Remember,Logo is very
Small in Maple,so no point in drawing big stuff.
You can draw it if u can change it's size,but i don't think it will be possible in Paint,coz it will be very UGLY...
Anyway...
After you Zoom in already,you should saw everything white,pure white.
Then u can start drawing.
no need to mind the bitmap.
if you are a big drawer(like to draw big-big)
you should go to View-Zoom-Custom...then zoom to either 600% or 800%.
And Remember,Logo is very
Small (2nd time)
you should draw almost close to this small
Example:
Quote:
1A)
1B)
Sorry about the bad quality and size,and it should be almost close to this size.
If the size is bigger,i don't think inside maple will show it.
After u draw it,check if its this size,when u are 100% sure.
Click and hold the node(square).
Quote:
2A)
2B)
2C)
And drag it like this
Quote:
3A)
This is the normal view,see at the top left-hand corner?
3B)
And this is the Zoom-in part
Close all the extra white part and close to ur logo.
If its hard to close it,go Zoom-in and close it(much more easier)
*i dunno how to make the extra white part transparent,i heard that photoshop can make it
*
After double checking it,click File-Save as...-.PNG & save it anywhere
(The name u can anyhow put)
*For easier searching,save it at Desktop*
After you save already,Now switch back to Hacking mode.
Go back to the HaRepacker
(If you ACCIDENTLY close it,go back up and read how to set-up HaRepacker again)
If you never close it,Let's Continue...
Choose any Mark you want
(Mark as in Animal,Etc,Letter,Pattern,Plant)
Double click and Highlight it and press Ctrl + A
if cannot click,go to Property-Add Property
The name,you should put according to the #
Example: I choose Animal as my Mark,there are
00002000 - 00002020 (correct?)
So,you should put the number that come after the last one
like this
00002000 - 00002020
your number is 00002021
Still don't get it???
(For those who get it already,can skip "Example 2")
Example 2:
I choose another Mark,let's say i choose Plant.
When you open up the SubProperty-Plant or Double click it,
they got alot of number right?
Like this:
[-]..Plant
[+]..00003000
[+]..00003001
[+]..00003002
[+]..00003003
[+]..00003004
[+]..00003005
[+]..00003006
Correct?
Then,if u add a New Property or Item into it,you need to make it to the last RIGHT?
Then,you just need to ADD an Addition 1 into the number.
Like this:
[-]..Plant
[+]..00003000
[+]..00003001
[+]..00003002
[+]..00003003
[+]..00003004
[+]..00003005
[+]..00003006
[+]..00003007 <--This is the Number you should put at the "Name:"
when you click Ctrl + A or Add Property.
See the Difference between the 1st and 2nd graph?
If you still do not get it,i really nothing to say already.
*Because,I 1st time use this one,and get most of the Editing part's already
,Without looking at other People TUT(except for the ND part's lol)*
Ok,off with the lecturing,and continue learning.
After u click Ctrl + A or Property-Add Property,you should saw a box.
At the Name part,put the Number
(If you dunno how to put the Name,go up to Example 2 and Read it ALOUD again)
If you know...
Continue going down...
The "Content:" ignore it,and the "Type:",click it and scroll down and choose "WzSubProperty"
Then,click Submit.
Hightlight the Number that you created,and click Ctrl + A or go to Property-Add Property.
The name your can choose in number already,
like 1,2,3,4,5,6 Etc
We take a Number,Example,1.
The "Type:" now choose "WzCanvasProperty"
Then at the "Content:",beside it click the "Browse PNG",and then choose the Picture(PNG) that u just draw.
After that,Click Submit.
After u click Submit,below your Number(0000****) should have either
1,2,3,4,5,6,7.
(Our's,we should saw a number 1)
And when you Highlight it,beside the box thing got show the Picture that you draw.
Click on 1(After you open the Number 0000****)
And press Ctrl + A or go to Property-Add Property.
The "Name" type in "origin" (without the " & CAPs)
And the "Type",change to "WzVectorProperty"
then the "Content" type in "0,0"
After all this thing,press Submit.
Then go back and Highlight the Number again
(The 0000****)
Highlight it and press Ctrl + A or Add Property
The "Name:" you can just put "name"
the "Type:",choose "WzStringProperty"
and the "Content:",just choose any name you want,like my one.
i choose the "Content" is Uchiha.
After all this is finish,press Ctrl + S or go File-Save and change the File Name to "UI",to your Desktop.
(The .wz after you save,they will set it already,so no need to bother put UI.wz)
Remember to back-up ur UI.wz file 1st.
then Drag the Edited UI.wz file into your MapleStory,Private Server folder.
then go in
to the maple private server and make your Guild with your Own Logo.
That's all in this TUT.
and really,i 1st time use the HaRepackerv.30
Oh...Btw
the other player cannot See your self make Guild Logo even if u put it as your Logo,coz they do not have the same UI.wz file.
If your want them to see it,u should tell the GM to make it patch or tell them to download the same UI.wz file you have,into their folder,then they can see it.
No negative/flaming word's thanks
<<PLEASE PRESS THANKS>>