[tac24]

Originally Posted by kawaiikenkun

u stole that tut

No.. I acually wrote that whole thing on this tut and copy pasted it and made it a TUT to get more help.

[tac24]

Originally Posted by [ilikepie]

dont edit your boot.ini
notice how i said ONLY windows xp?

It is Windows xp smart one just not pro edition its home edition.

[[ilikepie]]

Originally Posted by tac24

Well im still having the problems with the whole reset thing. Ill tell you what im doing step by step so maybe someone could help me. Ok this is how my original boot.ini looks
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOW S
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS=" Microsoft Windows XP home edition" /fastdetect

OK so I go to my ml_engine+1083.3 folder then ill see a pop up that says something like "ME????! ??ME????? [Only registered and activated users can see links. ] ill hit ok then my ce pops up and i usually go to settings just to make sure that everything is correct, here are my settings
General Settings
[x] show undo button
[x] show advanced options
[x] update the list of found addresses even after scanning
[x] center moon1ight Engine when bring to front
[x] Hide some/all windows instead of trying to bring Moon1light engine to front
Adress list specific
[x] show calues as if they are signed
[ ] show and work with brinaries as if they are decimals
[ ] simple copy/paste
update interval 500ms
freeze interval 250ms
Found address list update intercal 1000ms

Scan settings
Size of scanbuffer (KB) 512 (can effect scan speed a lot)
[ ]
[ ]
[ ]
[ ]
scan the following memory typed:
[x]MEM_private:Memory that is private
[x]MEM_image:Memory that is mapped into the view of an image section
[ ]
running the scan blablabla
[x] Run scan in seperate thread
Thread priority "Higher"

File Associations nothing ticked
Plugins nothing ticked

Code finder
[x] Use debug registers....etc
[ ] memory access expections
[x] Try to precent detection of the debugger
[ ] Handle breakpoints not cause by me

Assember everything ticks except Use int3 instructions to breakpoints (unlimited)

Extra

[x] query mem. region routines
[x] Read/write process memory
faded [x] open process
[ ] undo changes to ME
faded [ ] for memory to be writable in case the stardard method is blocked
Faded [x] enable use of the process Watcher
[x] Use kernelmode debugger options when possible
[ ] stealth Mode (usermode)
[ ] stealth mode (kernelmode)

Those are my settings.. then after I make sure thats all good i click ok on the settings button and go up the little folder on the top left and click it and open my ct which is Maplestory.CT then i click the open maplestory button on the ce then boom restarts comp.. sorry if this whole thing sounds really noobish which i know it is because ive seen so many people have this same problem so im probably no different then anyone else but if someone could pm me or just respond to this id appreciate it lol this whole hacking thing is gonna drive me crazy if i dont get it soon thanks again people.

dont change your boot.ini
your computer will fail.(bad)

[[ilikepie]]

Originally Posted by tac24

It is Windows xp smart one just not pro edition its home edition.

well.
no home edition if you read any others.

[[ilikepie]]

Originally Posted by blackopzx

Hey ilikepie.. can we change it back to the AMCI multiprocessor PC? If we can can someone plz tell me how o.O

do the same thing,but choose AMCI multiprocessor PC if its there.

[[ilikepie]]

Originally Posted by tac24

Well im still having the problems with the whole reset thing. Ill tell you what im doing step by step so maybe someone could help me. Ok this is how my original boot.ini looks
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOW S
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS=" Microsoft Windows XP home edition" /fastdetect

OK so I go to my ml_engine+1083.3 folder then ill see a pop up that says something like "ME????! ??ME????? [Only registered and activated users can see links. ] ill hit ok then my ce pops up and i usually go to settings just to make sure that everything is correct, here are my settings
General Settings
[x] show undo button
[x] show advanced options
[x] update the list of found addresses even after scanning
[x] center moon1ight Engine when bring to front
[x] Hide some/all windows instead of trying to bring Moon1light engine to front
Adress list specific
[x] show calues as if they are signed
[ ] show and work with brinaries as if they are decimals
[ ] simple copy/paste
update interval 500ms
freeze interval 250ms
Found address list update intercal 1000ms

Scan settings
Size of scanbuffer (KB) 512 (can effect scan speed a lot)
[ ]
[ ]
[ ]
[ ]
scan the following memory typed:
[x]MEM_private:Memory that is private
[x]MEM_image:Memory that is mapped into the view of an image section
[ ]
running the scan blablabla
[x] Run scan in seperate thread
Thread priority "Higher"

File Associations nothing ticked
Plugins nothing ticked

Code finder
[x] Use debug registers....etc
[ ] memory access expections
[x] Try to precent detection of the debugger
[ ] Handle breakpoints not cause by me

Assember everything ticks except Use int3 instructions to breakpoints (unlimited)

Extra

[x] query mem. region routines
[x] Read/write process memory
faded [x] open process
[ ] undo changes to ME
faded [ ] for memory to be writable in case the stardard method is blocked
Faded [x] enable use of the process Watcher
[x] Use kernelmode debugger options when possible
[ ] stealth Mode (usermode)
[ ] stealth mode (kernelmode)

Those are my settings.. then after I make sure thats all good i click ok on the settings button and go up the little folder on the top left and click it and open my ct which is Maplestory.CT then i click the open maplestory button on the ce then boom restarts comp.. sorry if this whole thing sounds really noobish which i know it is because ive seen so many people have this same problem so im probably no different then anyone else but if someone could pm me or just respond to this id appreciate it lol this whole hacking thing is gonna drive me crazy if i dont get it soon thanks again people.

wrong settings.
please follow mine.

[dabestplayer]

OMG, THIS BROKE MY COMP. THERES AN ERROR MISSING FILE OR SOMETHING IT HAPPENED RIGHT AFTER edit boot.ini

1. right click My Computer or open control panel click System
2. click properties
2. click Advanced
3. click Startup and Recovery Settings
4. click Edit
5. COPY THIS AND REPLACE ALL OF THIS INTO THAT TEXT DOCUMENT. Quote:
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOW S
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS=" Micr osoft Windows XP Professional" /noexecute=AlwaysOff /fastdetect

OMG ANY1 KNOW HOW TO FIX?

[[ilikepie]]

mirc osoft?
what the hell?
its
mircosoft

[ahsswim]

OK so i tick dmg ctrl nd wait for the eip nd then put it in. wen a monster touches me i disconect. plzz help. i dont know wat im doing wrong. could the engine just not work for me? thx for the help

[[ilikepie]]

your settings may be wrong.. but that makes no sense.
what do you use?
windows XP?
or something else>