Hacking Tutorial For new Comers

pokatea · 11-23-2007, 02:35 AM

If anything you feel should be added. Feel free to leave a post and I will add it as soon as I can.

PART ONE! GETTING YOUR ENGINE AND SETTING IT UP!

1)You should download a UCE or make your own.

1a)Making your own is easy, but you would have to update it yourself. For more information about this PM me.

1b)I Attached a good engine.

2)After you have your engine be sure to have the correct settings, which are...

General Settings:
Tick Everything - exept the last one

Scan Settings:
[ ] Fast scan on by default
[x] Enable hyperscan when possible
[ ] Don't scan memory that is protected with the No Cache Option
[ ] Keep low memory usage when doing an "Unknown Initial Value scan" with Hyper Scan

[x] MEM_PRIVATE
[x] MEM_IMAGE
[ ] MEM_MAPPED
[X] Run scan in seperate thread.

File Associations:
Tick Nothing

Code Finder:
[x] Use Debug Registers
[ ] Memory Access Exceptions
[x]Try to prevent detection of the debugger
[ ] Handle breakpoints not caused by CE

Assembler:
[x] Show disassembler
[x] Show debugger options
[x] Use hardware breakpoints
[ ] Use int3 instructions for breakpoints
[x] Replace incomplete opcodes with nops
[x] Ask for replace with nop
[x] Try to prevent detection of the debugger

Extra:
[ ] Query memory region routines
[x] Read/Write process memory
[x] Open Process

[ ] Use APC to inject dll's
[ ] Use APC to create new threads
[ ] Undo changes to CE
[ ] Force memory to be writable in case the standard method is blocked
[x] Enable use of Process Watcher
[x] Use kernel debugger options when possible

[ ] Stealth mode (Usermode)
[ ] Stealth mode (Kernelmode)

PART TWO! BYPASSING AND USING A CRC BYPASS!

1)Be sure to have a crc bypass, UNLESS you don't want it.
1a)If you want it go here and make one. It is simple and easy.
[Only registered and activated users can see links. ]

2)Zenos already bypasses MapleStory so you don't have to worry about that.

3)Start up your engine(Zenos), open Maplestory.exe and click the blinking computer and click process watch and click Maplestory(#)

PART THREE! MORE COMPLICATED WORK!

I think we are doing good if you are already here! This section is if you actually want to LEARN! (Yes I know we are not in school,but this might help you in the future with future jobs)

Applying the hacks.

Well, lets say you want to activate godmode without using a crc bypass.
First of all, make sure you are in game. And click on Memory view.
Then press CTRL+G and type in the address. If the address says ZF[X]
Then right click the highlighted address after you typed it in and pressed enter and click "Change register at this point" Then click the First box of the ZF column. If you use a crc bypass. I think you should know how to use it

Learning ASM!

ASM) This is a beginner's Assembly language tutorial. For those who have gotten past the stage of simple hacking and want to learn how to start writing their own assembly scripts.

ASM2) Visit TheSorc3r3r's Beginners ASM Tutorial To Learn More About ASM [Only registered and activated users can see links. ]

Learning C!

C) Basic C Language

C2) Visit
[Only registered and activated users can see links. ] to learn this.

Learning C++!

C++) This is a bit complex at first. But you will get it later on. Here is a link to Learn C++ in 21 Days!
[Only registered and activated users can see links. ]

Learning VB!

VB) To learn about Visual Basics go to
[Only registered and activated users can see links. ]

If this helps please click the Thanks button =D

sithmaster3 · 11-23-2007, 06:10 PM

hmmmm is it me or there isn't anything attached?

FatalSky · 11-24-2007, 11:47 AM

Quote:

Originally Posted by sithmaster3

hmmmm is it me or there isn't anything attached?

i think ur suppose to find them urself... maybe

pokatea · 11-24-2007, 06:22 PM

This is a just a TUT.
=D Use the Search button (:

Couch3ater · 11-30-2007, 02:39 PM

Nice Tut. It's been awhile since I've messed around with hacking MS, so this really refreshed my memory. Now, off to find that CRC address. Thanks.

toothyXdip · 11-30-2007, 05:00 PM

OMFG IM GOING CRAZY....i have been looking for a engine or bypass for like 3 hours...i have the ability to make it but i dont have the time

NastyDevil · 12-01-2007, 09:56 AM

Quote:

Originally Posted by toothyXdip

OMFG IM GOING CRAZY....i have been looking for a engine or bypass for like 3 hours...i have the ability to make it but i dont have the time

you sure dont have the time buddy...

mikeeey · 12-01-2007, 07:59 PM

Quote:

i have been looking for a engine or bypass for like 3 hours...i have the ability to make it but i dont have the time

wtf u going on about, 3 hours is a long time -_-

11-23-2007, 02:35 AM	#1
pokatea Banned Last Online: 11-28-2007 08:44 PM Join Date: Jul 2007 Age: 28 Posts: 40 Thanks: 3 Thanked 24 Times in 12 Posts iTrader: 0 / 0% Points: 7,718.00 Bank: 0.00 Total Points: 7,718.00 Donate	Hacking Tutorial For new Comers If anything you feel should be added. Feel free to leave a post and I will add it as soon as I can. PART ONE! GETTING YOUR ENGINE AND SETTING IT UP! 1)You should download a UCE or make your own. 1a)Making your own is easy, but you would have to update it yourself. For more information about this PM me. 1b)I Attached a good engine. 2)After you have your engine be sure to have the correct settings, which are... General Settings: Tick Everything - exept the last one Scan Settings: [ ] Fast scan on by default [x] Enable hyperscan when possible [ ] Don't scan memory that is protected with the No Cache Option [ ] Keep low memory usage when doing an "Unknown Initial Value scan" with Hyper Scan [x] MEM_PRIVATE [x] MEM_IMAGE [ ] MEM_MAPPED [X] Run scan in seperate thread. File Associations: Tick Nothing Code Finder: [x] Use Debug Registers [ ] Memory Access Exceptions [x]Try to prevent detection of the debugger [ ] Handle breakpoints not caused by CE Assembler: [x] Show disassembler [x] Show debugger options [x] Use hardware breakpoints [ ] Use int3 instructions for breakpoints [x] Replace incomplete opcodes with nops [x] Ask for replace with nop [x] Try to prevent detection of the debugger Extra: [ ] Query memory region routines [x] Read/Write process memory [x] Open Process [ ] Use APC to inject dll's [ ] Use APC to create new threads [ ] Undo changes to CE [ ] Force memory to be writable in case the standard method is blocked [x] Enable use of Process Watcher [x] Use kernel debugger options when possible [ ] Stealth mode (Usermode) [ ] Stealth mode (Kernelmode) PART TWO! BYPASSING AND USING A CRC BYPASS! 1)Be sure to have a crc bypass, UNLESS you don't want it. 1a)If you want it go here and make one. It is simple and easy. [Only registered and activated users can see links. ] 2)Zenos already bypasses MapleStory so you don't have to worry about that. 3)Start up your engine(Zenos), open Maplestory.exe and click the blinking computer and click process watch and click Maplestory(#) PART THREE! MORE COMPLICATED WORK! I think we are doing good if you are already here! This section is if you actually want to LEARN! (Yes I know we are not in school,but this might help you in the future with future jobs) Applying the hacks. Well, lets say you want to activate godmode without using a crc bypass. First of all, make sure you are in game. And click on Memory view. Then press CTRL+G and type in the address. If the address says ZF[X] Then right click the highlighted address after you typed it in and pressed enter and click "Change register at this point" Then click the First box of the ZF column. If you use a crc bypass. I think you should know how to use it Learning ASM! ASM) This is a beginner's Assembly language tutorial. For those who have gotten past the stage of simple hacking and want to learn how to start writing their own assembly scripts. ASM2) Visit TheSorc3r3r's Beginners ASM Tutorial To Learn More About ASM [Only registered and activated users can see links. ] Learning C! C) Basic C Language C2) Visit [Only registered and activated users can see links. ] to learn this. Learning C++! C++) This is a bit complex at first. But you will get it later on. Here is a link to Learn C++ in 21 Days! [Only registered and activated users can see links. ] Learning VB! VB) To learn about Visual Basics go to [Only registered and activated users can see links. ] If this helps please click the Thanks button =D

11-23-2007, 06:10 PM	#2
sithmaster3 Registered User Last Online: Today 05:42 PM Join Date: Feb 2007 Location: HELL!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Posts: 234 Thanks: 8 Thanked 20 Times in 19 Posts iTrader: 0 / 0% Points: 2,180.98 Bank: 6,487.09 Total Points: 8,668.07 Donate	Re: Hacking Tutorial For new Comers hmmmm is it me or there isn't anything attached?

11-24-2007, 06:22 PM	#4
pokatea Banned Last Online: 11-28-2007 08:44 PM Join Date: Jul 2007 Age: 28 Posts: 40 Thanks: 3 Thanked 24 Times in 12 Posts iTrader: 0 / 0% Points: 7,718.00 Bank: 0.00 Total Points: 7,718.00 Donate	Re: Hacking Tutorial For new Comers This is a just a TUT. =D Use the Search button (:

11-30-2007, 02:39 PM	#5
Couch3ater Registered User Last Online: 03-03-2008 06:21 PM Join Date: Aug 2006 Location: Skiing... Age: 16 Posts: 117 Thanks: 9 Thanked 428 Times in 23 Posts iTrader: 0 / 0% Points: 886.00 Bank: 0.00 Total Points: 886.00 Donate	Re: Hacking Tutorial For new Comers Nice Tut. It's been awhile since I've messed around with hacking MS, so this really refreshed my memory. Now, off to find that CRC address. Thanks.

11-30-2007, 05:00 PM	#6
toothyXdip Registered User Last Online: 04-30-2008 03:51 AM Join Date: Jan 2007 Age: 15 Posts: 15 Thanks: 3 Thanked 2 Times in 2 Posts iTrader: 0 / 0% Points: 226.00 Bank: 0.00 Total Points: 226.00 Donate	Re: Hacking Tutorial For new Comers OMFG IM GOING CRAZY....i have been looking for a engine or bypass for like 3 hours...i have the ability to make it but i dont have the time

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Hacking Tutorial For new Comers

Maple Story Tutorials