GamerzPlanet - For All Your Online Gaming Needs!!

Go Back   GamerzPlanet - For All Your Online Gaming Needs!! > Maple Story > Maple Story Hacks/Bots Discussion > Maple Story Tutorials

Maple Story Tutorials Tutorials only. No requests.



[TUT]How to use MoonLight Engine to hack GMS.

Maple Story Tutorials


Reply
 
Thread Tools Display Modes
Old 03-10-2008, 06:14 PM   #1
Lurker
 
Last Online: 04-18-2008 07:05 AM
Join Date: Mar 2008
Posts: 2
Thanks: 0
Thanked 7 Times in 1 Post
XxXJessyXxX is on a distinguished road
iTrader: 0 / 0%
Points: 2,917.00
Bank: 0.00
Total Points: 2,917.00
[TUT]How to use MoonLight Engine to hack GMS.

BTW: I am Gamelover27 from CEF!

EDIT: I've found out why some of you are getting the "Hacking Attempt Detected" notice. The CRC bypass I've uploaded seems to be detected. Instead of using it, use the classic .cem file and CRC script. I'll post one as soon as I make/find one :D Credits to Dingler, for realizing this.

EDIT2: I've posted a .CEM file and a CRC Bypass script, so replace these with the CRC.dll I've uploaded before (if you've downloaded it) and everything should work okay.

EDIT3: I've posted a new CRC bypass script, credits to huanjoe. The old one wasn't working so just replace this with the old one that I had put up. I've also added how to convert to a single core computer and how to fix the hacking attempt detected notice. I've also added the method of reverting back to your previous core(s).

EDIT4: I've found a Dynamic CRC bypass. it works 100%. All you do is inject it into maplestory. If you use this, don't use the crc bypass script i posted. Credits to FerrisBuellerYourMyHero. Heres the link: [Only registered and activated users can see links. ]

EDIT5: For everyone thats getting hacking attempt you need to edit your boot.ini...
Heres a quick tut on how to fix it
  • 1. Press start, right click on my computer and click properties
    2. Click the advanced tab and click "Start up and Recovery"
    3. Click Edit, and than a notepad file should pop up
    4. THIS IS VERY CRUCIAL. DON'T MESS IT UP! find this line

    Code:
    multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /noexecute=optin /fastdetect
    
    5. Change
    Code:
    multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /noexecute=optin /fastdetect
    
    (erase the optin) to
    Code:
    multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /noexecute=AlwaysOff /fastdetect
    
    (to AlwaysOff).
    6. Save and Reboot.

This is the only way you wont get Hacking Attempt Detected. I had that error too before, but after I did this, I can sucessfully bypass



Okay guys, well it seems that a lot of people would rather use MLE than Escastic. I'm posting a tut which I think might work. If it doesn't, i'll remove it :D. I will test it in an hour or so, I'm sorta doing something right now and I have to downgrade to a single core to actually test it. Anyways, on to the TUT!
Here are the things you need
  • 1)You must download MLE for this tut to bring you anywhere :D
    I've attached one to the bottom, so you can download it from here or you can search for it by your self xD
    2) You need to download Ferris's GGCRC bypass, which was included in Escastic. The trick is, you have to isolate the files from Escastic in order for it to work alone :D
    3) You will also need MemFix, which I am attaching to the bottom. Credits to Gthuggin for it. What it bascially does is make it so you can tick hacks while in game.
    4) You will also need a CRC bypass. I will attach one to the bottom, credits to me :D

The Tutorial :D
  • 1) Open up MLE. Make sure that you are running a single core computer in order for it to function properly. NOTE: Make sure you have also run the .reg file in order for the settings to take place. You shuold also run System Call Retriever so the proper names of functions come up.
    2) The second step is to open up the GGCRC bypass. Don't worry about attaching it, since it auto-attaches and closes automatically
    3) The next thing you need to do is open up gthuggin's bypass. Instead of running the injector (which came with it) I would recommend that you change the name from MemFix.dll to PCOMDebug.dll and copy it into MapleStory's folder. The reason for this is, that MapleStory think's that the .dll is a part of the game and it auto injects it.
    4) Copy my .CEM file, which I’ll upload at the bottom, to the MLE main directory (where all the other files are)
    5) Now click Auto Assemble on MLE and paste this script in.

    Code:
     
    [enable]
    alloc(newmem,2048)
    alloc(blaaaa,3670018)
    label(originalcode)
    loadbinary(blaaaa,Gamelover27.CEM)
    
    newmem:
    cmp ecx,00400000
    jb originalcode
    
    cmp ecx,00780000
    ja originalcode
    
    mov eax,blaaaa
    sub eax,00400000
    add ecx, eax
    
    originalcode:
    mov eax,[ebp+10]
    push esi
    push edi
    jmp 45de2c
    
    00473980:
    jmp newmem
    
    [disable]
    00473980:
    mov eax,[ebp+10]
    push esi
    push edi
    dealloc(newmem)
    dealloc(blaaaa)
    
    6) Now Click File and click “Assign to Current Cheat Table”.
    7) Next, rename auto assemble cheat to “CRC Bypass”
    8.) The next thing to do is open up MapleStory (if your using dxwnd, open up dxwnd than MapleStory)
    9) MLE should auto inject on to MapleStory and on the top you should see MapleStory.exe and some random number :D
    10) When you press play, GGCRC should inject the GameGuard CRC into maplestory and auto close. If your using Gthuggin's injector to inject the memfix into MapleStory, I believe that should close too.
    11) Now tick the CRC bypass script and you can now tick any CRC scripts you would like to since you have successfully bypassed maplestory. Remember, debug registers will instantly d/c you, so stay clear of those.

If you would like to convert to a single core computer, here is a short tutorial on how to.
  • 1. Right click on my computer, then click properties.
    2. Go to devices, then device manager.
    3. Click the plus sign by the computer(+).
    4. Right-click ACPI Multiprocessor PC and click update driver.
    5. Select install from a list or specific location (advanced).
    6. Select Advanced Configuration and Power Interface (ACPI) PC
    7. Go on with installation, and then restart computer.

If you would like to revert your computer to the way it was before and get all your core(s) back this is what you do.

Now, to convert back to a dual core/quad (whatever you had before) this is what you do.
  • 1. First, right click on my computer (located in the start menu)
    2. Click properties and a window should pop up.
    3. Click the Hardware tab and than click the "Device Manager" button.
    4. Click the little plus button next to "Computer" and right click on the processor type that pops up.
    5. Next, click Properties and than a new window should pop up.
    6. Click on the "Driver" tab and than click Roll Back Driver.
    7. Click Okay, (or whatever that pops up) and it'll ask you to restart your computer.
    8. After you restart your computer. your comp should be restored to the previous state. :D

ModEdit: DO NOT EDIT YOUR BOOT.INI!
7. Save and restart computer

[b]If you've got any GameGuard errors (like 114) refer to [Only registered and activated users can see links. ] post to fix them.

Downloads:

[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]

If I have forgotten to give credits to someone, please tell me :D

Thanks for reading, and if it doesn't work either PM me or post it at the bottom.
XxXJessyXxX is offline   Reply With Quote
The Following 7 Users Say Thank You to XxXJessyXxX For This Useful Post:
dhampire (06-10-2008), elistoria (03-10-2008), eyfooitsfred (04-20-2008), frenchesssss (06-07-2008), michaelRX (06-19-2008), own3d (03-11-2008), skilledclan (05-29-2008)
Sponsored Links
Old 03-10-2008, 07:35 PM   #2
Registered User
 
Last Online: 07-29-2008 08:35 AM
Join Date: May 2007
Posts: 49
Thanks: 6
Thanked 3 Times in 3 Posts
cloud202 is on a distinguished road
iTrader: 0 / 0%
Points: 1,160.00
Bank: 0.00
Total Points: 1,160.00
Re: [TUT]How to use MoonLight Engine to hack GMS.

Thanks for all that but... there really is NO need for that big of font...
cloud202 is offline   Reply With Quote
The Following User Says Thank You to cloud202 For This Useful Post:
DrunkenMexico (04-17-2008)
Old 03-10-2008, 07:57 PM   #3
Registered User
 
Last Online: 10-03-2008 12:49 PM
Join Date: Dec 2007
Location: Cairo, Egypt : Windia
Age: 23
Posts: 37
Thanks: 3
Thanked 4 Times in 3 Posts
Enzan is on a distinguished road
iTrader: 0 / 0%
Points: 4,503.09
Bank: 0.00
Total Points: 4,503.09
Re: [TUT]How to use MoonLight Engine to hack GMS.

Yup we're not blind xD, LMAO, guys can someone please check this for keyloggers ?? if it's free then OMG THANKS
Enzan is offline   Reply With Quote
Old 03-10-2008, 11:22 PM   #4
Lurker
 
Last Online: 05-17-2008 12:50 AM
Join Date: Jan 2008
Posts: 4
Thanks: 2
Thanked 0 Times in 0 Posts
elistoria is on a distinguished road
iTrader: 0 / 0%
Points: 200.00
Bank: 0.00
Total Points: 200.00
Re: [TUT]How to use MoonLight Engine to hack GMS.

uhhh i have two questions that im not sure about,
One - when you say "Copy my .CEM file, which I’ll upload at the bottom, to the MLE main directory (where all the other files are)" Where exactly is that? just the mle folder? or is it more than that.
And 2 - When i auto assemble, post the script in and click assign to current cheat table it says "The code needs a [ENABLE] and a [DISABLE] section if you want to add it to a table." Help with this would be appreciated.
P.S this will be great if it works cuz ecstatic is ok but it dcs too often with vacs etc..

Edit - Have found a way to make the script work (two)... but one still stands

Last edited by elistoria; 03-10-2008 at 11:52 PM.
elistoria is offline   Reply With Quote
Old 03-11-2008, 01:34 AM   #5
Registered User
 
Last Online: 10-10-2008 02:35 AM
Join Date: Mar 2007
Age: 27
Posts: 24
Thanks: 6
Thanked 1 Time in 1 Post
Subarustyle is on a distinguished road
iTrader: 0 / 0%
Points: 6,798.00
Bank: 0.00
Total Points: 6,798.00
Re: [TUT]How to use MoonLight Engine to hack GMS.

i can't tick crcbypass if i tick it hack attemp.
i could go in with out ticking it.
Y?
Subarustyle is offline   Reply With Quote
Old 03-11-2008, 02:07 AM   #6
Registered User
 
Last Online: 10-10-2008 05:24 PM
Join Date: Jan 2007
Age: 22
Posts: 94
Thanks: 47
Thanked 9 Times in 9 Posts
awsomeo is on a distinguished road
iTrader: 0 / 0%
Points: 4,837.96
Bank: 0.00
Total Points: 4,837.96
Re: [TUT]How to use MoonLight Engine to hack GMS.

LEACHED FORm CEF....=\ didnt even bother post credits
awsomeo is offline   Reply With Quote
The Following User Says Thank You to awsomeo For This Useful Post:
flyduster90 (05-26-2008)
Old 03-11-2008, 02:14 AM   #7
Lurker
 
Last Online: 05-17-2008 12:50 AM
Join Date: Jan 2008
Posts: 4
Thanks: 2
Thanked 0 Times in 0 Posts
elistoria is on a distinguished road
iTrader: 0 / 0%
Points: 200.00
Bank: 0.00
Total Points: 200.00
Re: [TUT]How to use MoonLight Engine to hack GMS.

After a mass of tweakin the process i managed to get to the characrter selection screen, but not any further, the ray of light would stay there for a bit and then i would get hacking attempt even tho ive tried multiple things from many different threads that say otherwise...
elistoria is offline   Reply With Quote
Old 03-23-2008, 06:40 PM   #8
Registered User
 
Last Online: 05-04-2008 10:34 AM
Join Date: Sep 2006
Age: 15
Posts: 108
Thanks: 21
Thanked 13 Times in 8 Posts
RangerOLight is on a distinguished road
iTrader: 0 / 0%
Points: 2,743.00
Bank: 0.00
Total Points: 2,743.00
Re: [TUT]How to use MoonLight Engine to hack GMS.

Quote:
Originally Posted by awsomeo View Post
LEACHED FORm CEF....=\ didnt even bother post credits
He did post credits. Learn to read.
RangerOLight is offline   Reply With Quote
Old 03-29-2008, 09:11 PM   #9
Registered User
 
Last Online: Yesterday 01:11 AM
Join Date: Mar 2006
Location: Trashcan...Cries
Posts: 129
Thanks: 6
Thanked 6 Times in 6 Posts
Kvizzel is on a distinguished road
iTrader: 0 / 0%
Points: 1,832.47
Bank: 0.00
Total Points: 1,832.47
Re: [TUT]How to use MoonLight Engine to hack GMS.

Wow nice big font, what a waste of space D:
Kvizzel is offline   Reply With Quote
The Following User Says Thank You to Kvizzel For This Useful Post:
DrunkenMexico (04-17-2008)
Old 03-29-2008, 09:55 PM   #10
Lurker
 
Last Online: 09-30-2008 06:35 PM
Join Date: Mar 2008
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
Lestat1986 is on a distinguished road
iTrader: 0 / 0%
Points: 300.00
Bank: 0.00
Total Points: 300.00
Re: [TUT]How to use MoonLight Engine to hack GMS.

Nice work but still working after the last update?
Lestat1986 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

All times are GMT -7. The time now is 07:14 PM.


Powered by: vBulletin
Copyright ©2008, GamerzPlanet.Net
SEO by vBSEO 3.2.0 ©2008, Crawlability, Inc.
Network: GamerzPlanet | ForumzPlanet | GzPUpload | GzPArcade | GzP Host | Poker Tips | Watch Desperate Housewives | Visits: