Release How to play SF with a controller

[vasa21911]

The xbox controller conversion tutorial is not illegal in any way!
Third, If you have questions contact me on xfire! (vasa11)

Section I
This section is for people WITH a gamepad.

Section II
This section is for people WITHOUT a gamepad. (But have an xbox controller)


================================================== ====

================================================== ====

================================================== ====


Code:
Section I This section is for people WITH a gamepad.

Code:
Materials
1. Gamepad
2. Your gamepad driver (Installed)

How To:

1. If you have your gamepad drivers installed on your computer and you know it works for certain games then go [Only registered and activated users can see links. ] and download Pinnacle Game Profiler.

2. After Download Install the program regularly, and at the Restart computer now, or later Select Yes to get it out of the way.<br>

3. When your computer restarts Download this file from [Only registered and activated users can see links. ] below for the controller configuration.
(for xbox controller only)



4. Extract the file in the zip folder to your desktop.<br>
5. Now open up your pinnacle Game Profiler
6. If it asks to update Say yes
7. Follow the setup wizard to configure your controller to the program
8. Now in the top right you should see a thing called "Game Profiles"

9. In the box that pops up click Import...

10. Now make your way to your desktop and open the file I gave you. Should be called "Internet Explorer." Then hit open.

11. On the box that pops up Hit Import...

12. There should be a list and "Internet Explorer" should be on it. If so.. Click okay.

13. It should open internet explorer. If so, it has worked...
14. In the address bar type in
[Only registered and activated users can see links. ]

15. Press play live
16. Log in to your Charactor
17. Pwn With your Controller!

Code:
ButtonList

R-Trigger = Gas
L-Trigger = Brake/reverse
Left Analog Stick = Steering
Right Analog Stick = Not used
A = Drift
X = Nitros
Y = Look Behind
B = Map
D-Pad Up = Invintory
D-Pad Downp=Friends
Start Button = Esc Key
Black Button = C/Change view

(**Note** If you get tired of your controller just set it down and use your keyboard)

Section II
For users without a gamepad! (But with an Xbox controller

__________________________________________________ ____________________
__________________________________________________ ____________________

Code:

Materials

XBOX Compatible Game Controller
Male USB Adapter Cable
Wire strippers (and/or scissors, if you must)
Electrical tape and/or heatshrink




The Mod

You can see that I'm using a Male-Female USB extension cable for my male USB adapter. We're just going to chop the adapter off and discard of the cable.

Make sure you use the right end (circled in the above picture). We're going to do the same thing to the Xbox cable, too.

Cut the Xbox adapter off right at the base, leaving yourself some room to splice on the new one. Cut the USB adapter off at least 4 or 5 inches away from the adapter. Now strip off about an inch of casing from the end of each exposed cable that we'll be connecting. There will be a lot of thin silver wires and foil wrapped around a few smaller, colored wires. The silver casing is the shielding, but unless you want to try and preserve it just cut it away to expose the colored wires.

Using your wire strippers, pull away the casing on each of the colored wires to expose the bare wire. Now you can proceed to actually splice the wires togteher.

Each wire of the USB adapter should match up to a colored wire on the gamepad. The Xbox controller has one additional yellow wire, which you can just ignore. You can use either heatshrink casing or electrical tape to cover up the bare leads. Heatshrink is more permanent and professional, but for simplicity I just used some electrical tape on each of the smaller wires, then wrapped up the entire thing tightly, making sure the bare leads did not cross.

You can see the ghetto-fabulous mod I've done above. The cable shown here detaches from the Xbox controller, which is why you don't see it actually leading to anything. Feel free to be as fancy as you want - some heatshrink will look nice and hold up better, so now that I know it works I'll probably redo the mod when I get to the second controller.

If everything went well, we should be able to set up the device and start using it. The first thing to do is snag the XBCD drivers ([Only registered and activated users can see links. ]), and run the installer file.

Once the drivers are installed, plug in the controller and it should detect and install the drivers for "XBCD XBox Gamepad". Now go to Programs -> XBCD -> Setup Utility and set up your new gamepad!

And that's it! Not bad for a ten minute mod. Enjoy.



:]

Now After this above instructions... go back to section one and do that!
And your all set!

Yup you sure can,

I thought ppl would not like to have the hassle of setting it up


1. Okay, go to "game profiles"
2. Choose Internet explorer
3. At the bottom left it should say "Edit configurations..." Click that


Now if you have the updated version it should look like below..





Now Just set up the keys from there! and if u guys have a 360 xbox u can just buy a 360 TZS360 controler they come with the usb so u dont have to do all that cutting but they cost 20-30 dollers THE CREDITS DO NOT GO TO ME THEY GO TO A GUY NAMED JORDAN ON IJJI FORUMS BUT THE RE-post GOES TO ME IF I HELPED USE THA THANKS BUTTEN

[imakehacks]

Very nice tutorial I'll test this but I'm not thanking you because Idc

[vasa21911]

okay umm but it might be a bit difficult at first u might have to adjust the sensitivity of ur aiming analog

[ipwnzi]

Very nice tut but messing with all those cords can be dangerous if you dont know what you are doing

[vasa21911]

yeas that is true thats why i sudjest buying a usb controller from gamestop for 30dollers but if u do have a small budjet just use the 5 doller controler plz be careful make sure u unplug every thing first!

[Icedgreece]

Just a warning, While wiring your Controller differently, be sure to have an adult help you. I'm 18 and I already ****ed up my finger using the wirecutters.

[vasa21911]

yesh plz do as the guy said it can be very dangarus

[ipwnzi]

anyways this should be in general discussion this really has nothing to do with hacks.

Anyways i got it working :) but i hate using it

[vasa21911]

you have to adjust the sensistivity of ur analog
makes every thing much easyer wean u get the perfect 1

[ipwnzi]

ya i know i got the perfect one and i went to training to test it out its very good :D